RockPro64 Case (for SSD)
Description
extremely small footprint case for the RockPro64 with a SATA card and one 2.5' SSD (located under the board). Works with any official RockPro64 CPU Heatsink and one 40mm case fan. Two back sections are included, one with extra holes big enough to pass the SATA and power cable through the outside of the case (if you don't want to cram it inside). I printed all the parts separately and super glued them together, the hood snaps in place for easy opening. All screw holes should align pretty well but there might be some tiny alignment issues depending on your printer, i suggest you enlarge the holes a little bit with a drill if needed.
Statistics
Likes
1
Downloads
0