Govee Immersion Adjustable TV mount
Description
This was inspired by CASHatFOLSOM's camera mount (https://www.thingiverse.com/thing:4905106). Unfortunately, his TV's form factor didn't match mine so I modified it to fit my TV. Still wasn't happy with the results because the camera angle was off, so I modeled an adjustable version. There are actually two versions to download...one for the Hisense H8G 55" TV (an adjustable version of CASH's) and one for a TCL 65" (my own tv). The model in the photos is the TCL variant. I don't know how well the Hisense model fits as I don't have a means to try it, but dimensionally it should be the same as the model linked above.. These are printed on their sides. Depending on the tolerance of your printer, you can should be able to get away with no supports. I printed without supports, and simply had to break the joint free from what little sag had fused. The adjustment is done with an M3 screw. I just threaded it into the printed hole and that's all it took. The mount is held to the TV with a double sided tape. CASHatFOLSOM pointed out that the TV might get warm enough to cause your adhesion to fail. Choose your adhesive wisely.
Statistics
Likes
2
Downloads
0