Da Vinci Cura Settings - repetier 0.9x
Description
Https://Www.Thingiverse.Com/Thing:2934923 << Pla Mod So You Dont Have To Worry About Jamming. Abs Does Work With Pva Using The Gluestick File. But It Likes To Pop Off If The Glass Goes Below 75. So We Might Have To Lay Down At A Cooler Temperature To Keep It Stuck. Also If Your Print Is Comming Off The Bed A Little Hotglue At The Base Will Ensure It Stays In Place. Http://Netpipe.Ca/?Page_Id=307 For More Pictures And Stuff Replacement Hotend So You Can Print Pla Without Having Issues. Https://Www.Ebay.Ca/Itm/3D-Printer-Universal-Hotend-W-Mk10-Nozzle-F-Mk8-Mk9-Extruder-Most-Extruders/252836580460 I Switched To Http://Www.Homehardware.Ca/En/Rec/Index.Htm/Paint-D%E9Cor/Painting-Supplies/Tape-Glue-Adhesive/Adhesives-Glues/White/950Ml-White-Glue/_/N-Ntmadz1R4P8F/R-I2020510 This Stuff And Its Amazing,. Turn The Hotend Turn Down To 208-209 After The First Layer. Use This Method Https://Www.Youtube.Com/Watch?V=Fuq2Eabkbdo Pvac For Pla And Bluetape For Abs Seems To Be The Combo That Works Great For Me. New Pvac - Pla V3 Settings I'Ve Been Using 208 And 50 For The Bed Temp Since Switching To This New Glue From Homehardware. Https://Www.Youtube.Com/Watch?V=Zqblnrecxli Video Of The Pva V8 Setting At 140% Speed Never Jams Enough To Stop A Print Just Keeps On Going Even For Whole Plates Of Stuff. Universalmod Files Are Adjusted For Different Thermistor, Abs Prints At 280 Which Is Probably Around 210C .I Have Kapton Tape And Fiberglass On It So Its Hard To Hit It With The Heatgun Now. Also You Can Play With The Speed Settings I Like To Run The Abs File At 120% Speed.
Statistics
Likes
9
Downloads
0