FGC9 MKII Extended Barrel Retainer
Description
This is essentially an extension of the original barrel retainer. I have included two different files, one is a lightened version of the other which should reduce the amount of required PLA significantly. You will need to have elongated tools to install this. The top rail is printed exactly the same as the other rail on the original FGC9 MKII. You will have to drill into the original rail in order to connect these two together, but it's easily done. Print settings using HATCHBOX PLA Nozzle size: 0.40mm Layer height: 0.16mm Infill density: 100% Nozzle temperature: 230°C +-5°C Bed temperature: 60°C Cooling: 80% Support Overhang Angle: 85 Build Plate Adhesion Type: Brim Disclaimer: As you all know, producing the FGC9 carries with it inherent risk. I do not claim any responsibility for injuries that may result from using these models in a way that may cause injury. If you choose to use this product you are responsible for yourself. If you like this file please consider donating: https://www.paypal.com/paypalme/WyldTurkey THIS PRODUCT HAS BEEN TESTED...sort of. I had printing issues and a shortage of PLA, so I printed it several times (failed prints) and JB welded them together: https://odysee.com/@Turkey:d/Range_Video_FGC9_MKII:d https://www.youtube.com/watch?v=4V03giKwzmw&t=24s
Statistics
Likes
4
Downloads
0