Modular Rail Wall Mount System
Description
As the name says, this is a wall mount rail system I designed (and plan on adding more to). The first rail is 6 inches and features my take on a French cleat style top with a bottom I designed to snap in place for securing the modules. The two modules I've included in the first set are basic through hole modules. I've included one with an inner dimension of 18mmx6mm and another with inside dimensions of 20.5mmx7.5mm. Assembly is rather easy, screw the rail into the wall using your preferred flat faced screws (I recommend at least one screw be in a stud), then place the top angle of the module over the angled part of the rail and press firmly on the bottom portion until you hear that lovely "click" as they snap in place. *** BE SURE TO MOUNT THE ANGLED PORTION FACING UP *** After installing, the modules can be slid on the rails easily and you can remove them by unsnapping the bottom or by sliding it off the edge of the rail. The printing process usually deforms the outer tips ever so slightly, so they "shouldn't" slide off unexpectedly but rather have just a slight catch which is easy enough to overcome if you intend to but still offer enough resistance to unintended slide-offs. I plan on adding many other modules such as circular options and borehole versions that will have bottoms as well all in various sizes. But as always, if you have any specific request, please feel free to leave a comment.
Statistics
Likes
2
Downloads
0