2.5mm Drill & 3mm Tap guide for VORON Bed Fuse
Description
This is used to help ensure the hole for drilling and tapping the Voron bed fuse and ground holes. DrillGuide.stl is for the 2.5mm and TapGuide.stl is for the 3mm tap to ensure the threads are started correctly. To help make sure you don't drill too shallow or deep you will need to ensure the bits stick out from chuck is around 26mm. With 26mm of stick out the drill/tap will make a hole 6mm deep in your 8mm thick bed.
Statistics
Likes
0
Downloads
0