Ender 3 Xmas House LCD cover
Description
**Small wood house** with snow on the roof (and some tracks on it ;)) **that you can use as an LCD cover** for decoration or just to shade the glow --- More photos: https://www.instagram.com/p/CXn5I0hN1jm/ and https://www.instagram.com/p/CXn53mbteN5/ --- **Additionally there is an xmas tree shaped knob with a star on top** **House is cut with 22,5 angle** as LCD metal frame and will fit it's hole - there is a model without a cut so you can cut it for different printers lcds if it is with the same proportions **The base is 78x48mm**. The frame hole should have around 80x52mm - if it is slightly smaller than the house you can resize the model (calculate by 78x48 as 100%, not the size It is printed in two parts You can use the base alone if you want --- **IMPORTANT** **The model is highier than top of the bed** If you have original extruder case (with the hotend not motor) you **can't** print at least up to 2cm on the right because extruder will collide with the house With moddified extruder (for example with bigger fans on sides) it will need even more space so remember this --- Made in Blender 3D Printed on Creality Ender 3 --- **More Christmas decorations on my Thingiverse collection** <a href="https://www.thingiverse.com/c47_3d/collections/christmas"><img src="https://cdn.thingiverse.com/assets/4a/58/50/52/a4/card_preview_Xmas_21_Spike_1_TG.jpg"></a> ---
Statistics
Likes
13
Downloads
0