Ender 5 ADXL345 Mount for Printermods MDD V1.3
Description
I couldn't find any half-decent mounts for my MDD configuration (Stock-style extruder, Micro-Swiss hotend w/ BLTouch), so I opened FreeCAD cobbled this together in half an hour. There are two versions: * "mdd ender 5 adxl345 mount rev1-adafruit" This file is for the adafruit ADXL345 board with 9 pins. Needs 2x M2 screws/nuts/washers to mount the accelerometer. * "mdd ender 5 adxl345 mount rev1-generic" This file is for the generic boards you get cheap from Amazon/Aliexpress that have 8 pins (as well as the Sparkfun version). Needs 2x M3 screws/nuts/washers to mount. Mounts behind the carriage, attach using the same bolts that hold the extruder motor to the gantry (may need longer bolts, if so they are M3 size, M3x40 worked for me with a nut as a spacer).
Statistics
Likes
2
Downloads
0