TI BoosterPack MKII LCD Cover
Description
Stick-on LCD cover to prevent LCD layer delamination and provide flex ribbon protection. Please see bare board picture to make sure your board version is suitable since there are several versions and this cover is only designed to fit boards shipped 2020 onward. Part is specifically designed with 0.2mm layer multiples and no infill using 0.4mm nozzle. Tape used is 0.2mm thick and sold as "thermal double sided tape" on Amazon, etc. After the part is printed, the tape side is lightly sanded with 400grit before tape is applied.
Statistics
Likes
0
Downloads
0