Scanaltar - Base (for Aputure MC led)
Description
The scanaltar provides a base for setting up a scanning using an aputure MC led lamp. It is designed to provide a secure hold with magnets on a metallic base. The following are required for this: - Neodyn magnets 10x8mm - Epoxy resin - Diffusion disk 2-3 mm thick and made of plexiglass or similar Setup: - print with 0,3mm - print the frame and glue it into the base so that the diffusion disk is aligned at the top of the base. - Let the Neodyn magnets protrude approx. 2mm at the top so that the various attachments, which are also available as print files, have a guide. Attachements: - Lomo Digitaliza 35mm you need 2x needy magnets 10x2mm and DIN 912 Bolts M6x15mm - Lomo Digitaliza 120 you need 2x needy magnets 10x2mm and DIN 912 Bolts M6x15mm
Statistics
Likes
1
Downloads
0