DIY Hue Signe (for Philips Hue Lightstrip)
Description
This is my DIY Version of a Philips Hue Signe lamp. I've created it to fit the following aluminum profile: https://www.alu-profile-led.de/led-alu-profile-eckprofil-ecke-rund-er-eloxiert-fuer-16mm-led-streifen-mit-einklickbarer-abdeckung-spree_227284_145178 (order it with the caps/lid) This profile can hold Lightstrips with a width up to 16mm (so yes, this fits the Hue Lightstrips!) In my example I've used a profile with a total length of 1500mm. The Box is approx. 90x90 mm with a height of 170mm (+ 3 additional mm for the lid), so 173mm in total. The usable/visible length is (with a 1500mm profile) about 1300mm. In the bottom you'll find a cable outlet to run the cable through from the controller to the power adapter. If you want to use a different aluminum profile, make sure that yours fit. For this purpose you can print the test_fit.stl file. One side of this "quarter-circle" shaped cut-out for the profile measures 19,55 x 19,55 mm
Statistics
Likes
0
Downloads
0