Shoe Rack v2 (3x beams)
Description
This is a simple and small shoe rack (NOT stackable, as I felt it would be too rickety and was unnecessary for me since I own like 3 pairs of shoes). I designed this shoe rack from scratch, referencing the existing design from 3DDIY (Stackable Shoe Rack) (theirs is stackable). This design has ACTUAL hexagon cutouts in the STL part - therefore it does not require you to do any funky infill or print settings. It's a normal part that you should be able to print like normal. In the pictures, I used .28mm layer height. <<<INFO>>> Fits about 2-3 pairs per level, for a total of 4-6 pairs. 7.26in (tall) x .5in (thick) x 7.5 (wide) <<<WOOD PLANK INFO>>> PICTURED: (x3) Home depot - WALNUT wood - .75in height, 2in wide, 2 ft long <<<PRINT INFO>>> PRINT WITH A BRIM!!! My first time printing had adhesion problems on both foot corners. With a brim or rift, it should print nicely. Can fit (with a brim) on an ender 3 pro printbed (you may need to adjust the amount of brim lines. If you have any recommendations let me know, I am open to modifying the Solidworks part :)
Statistics
Likes
19
Downloads
0