Shelly 1 plus case
Description
This case houses a shelly 1 plus (probably will work for other shelly devices with the same form factor, haven't checked). Intended to be used with a regular 3-core 1.5mm wire and a 3-pole wago plug to connect earths. Needed to have a shelly device in-line with a any other electrical device - in this particular case it's a subwoofer. Can be put in line with pretty much anything you want to control. uses three m3 threaded inserts to seal the lid and some short (5mm thread length) m3 screws
Statistics
Likes
13
Downloads
0