Anycubic Wash & Cure 1.0 - Build-Plate-Holder
Description
Attention: The build plate holder cannot be used together with the Wash & Cure protective hood. In order to use the Wash & Cure station in combination with the holder, the sensor on the back of the UV light column must be bypassed with a reflector or a strip of white paper. By doing so, you must be very careful not to start the Wash & Cure Station in Cure mode (default setting at power on)! Harmful UV radiation will be emitted. Use at your own risk and responsibility! Summary: Since i bought a used Anycubic Wash & Cure 1.0 Station without any accessories, I needed among others a holder for my Elegoo Mars Pro building plate. The Build-Plate-Holder can be placed directly on the tank of the wash station. The bath depth of the build plate can be adjusted manually. Things you need: 4x Heat Insert, M3 x D5.0 x L4.0 (2 for "Strip_Mount", 2 for "Elegoo-Mars-Pro-Adapter") 1x Heat Insert, M4 x D6.0 x L6 (for "Strip_Clamp") 1x Countersunk screw, M4 x 30 1x M4 Hex nut 2x Countersunk screw, M3 x 16 2x Socket head cap screw M3 x 16 Printing: The "Strip_mount", "Sliding_strip", "Tank_Cover" and the Adapter should be printed with 4 perimeters and at least 25% infill. The "Strip_mount" is the only part that will need support structure. The other parts you can print as you like. The Build-Plate-Adapter and the Tank Cover is designed for my Elegoo Mars Pro build plate. In case you want to customize the adapter to your own printer I have added the above mentioned parts as STEP files. Let me know if you need more parts as STEP.
Statistics
Likes
0
Downloads
0