DICE LED luminaire with mains connection AC DIY
Description
Here comes the lamp for the new universal luminaire base. Please see the other needed item, the universal lamp base for E14 mains LED lamps: https://www.thingiverse.com/thing:5172434 there I explain the assembly of the socket and the needed additional parts. The print of the dice is a little bit demanding. Needs no support but inner and outer brim. I added 10mm brim. For safety, I fix the brim by duct tape on the buildplate (see pic). Maybe reduce acceleration of printer. Printer settings: Infill 10-20% layer 0.2mm brim: inner and outer Pictures show 100% size. The dice is ~120mm heigth (without lamp socket) Please chose your favorite adapter for individual height of the dice...depends on size of the LED bulb. Pictures show 50mm adapter. I use the 1.8W fridge LED lamps (E14 socket, 230VAC), pretty small and bright enough. Maximum diameter of the bulb shall be 26mm to fit inside the dice. Please do not use conventional incandescent lamps, because of the heat. For easier assembly I recommend a hot air gun. Make the flanges smooth and an easy assembly. After cooling its a perfect fit. Always brightness by this nice decoration lamp. I am looking forward, if you share your make or personal ideas.
Statistics
Likes
2
Downloads
0