Original Lightsaber REMIX
Description
- Made a new hilt that can fit a 40mm x 20mm speaker to get that good sound with the feathers board. I used the 34mm - Tube for the saber blade to be thicker (still 1'' ID) and actually fits perfecting inside the other pieces (the exterior parts) - Tube that will fit a USB Micro-B Breakout Board when you size it down the board to 20.60mm - Switch holder for the USB - full saber with new hilt for a sound saber with color coding follow this https://learn.adafruit.com/lightsaber-featherwing this code is lame. use the one post here! the code I have here lets you have color/mode change in one button! dope! - "lightsaber-master.zip" has the code and install instruction there - https://www.adafruit.com/product/3857 Adafruit Feather M4 https://www.adafruit.com/product/3988 FeatherWing https://www.adafruit.com/product/3350 RGB Push button https://www.adafruit.com/product/1833 USB Micro-B Breakout Board https://www.adafruit.com/product/3968 Speaker Reset of the file you can get from the Original maker; - https://www.thingiverse.com/thing:1854286 - original code I have added and edited hence then: https://github.com/georges/lightsaber For a nice gold/chrome use rust-oleum metallic finish: https://www.rustoleum.com/product-catalog/consumer-brands/stops-rust/bright-coat-spray?ls=7710830&lc=Gold included read to print G-code files. @ 220c / 70c bed
Statistics
Likes
7
Downloads
0