Horsey
Description
- Insert-able length is 165mm (6.5"), Shaft Diameter 38mm (1.5"), Head Diameter 46mm (1.8"), Medial Ring Diameter 42mm (1.66"), it also has a suction cup - mold volume 225 mL (7.6 fluid oz) - Each has a mold and the actual pecker itself depending on how you are going to mold them. - mold has location for 2 10mm dowels. - can be scaled, cut and glued together to any size you want - A good silicone choice "Smooth-on dragon skin 10 Slow" ___________________________________________________________________ - https://www.billieruben.info/post/3d-printing-sex-toys-a-quick-easy-and-safe-method - Print with thick walls ex: 4 layers or more - if going the wax route don't let the molten wax sit in the mold too long, it softens the plastic - you can also just print the dick it self, sand it smooth, seal and make a mold the old fashion way, use this way for the best results. - I recommend printing vertical if possible to get the resolution. - also need some 5mm dowels to align the top but not 100% needed. - pour the silicone to just bellow the surface then right at the end of the pot life smush the top on using pins (ex skewers) in the alignment hole and a weight to keep it from moving - a good resource for silicone toy making: https://vimeo.com/candiru - if you screw up your first toy just cut it up and use it as filler for the next toy - Have Fun!!
Statistics
Likes
4
Downloads
0