Stribog folding charging handle
Description
A folding charging handle for the Stribog, only tested on the A3 since that's what I have. The tab and root can be connected with a small roll pin, and there's a hole in the root to put a spring loaded detent, both the roll pins and detents will have to be bought separately. A kit of roll pins can be bought on amazon. The detents I used are from JW WINCO. Google "610-3-16-HN" and they should appear. **__IMPORTANT__** **Be careful using the charging handle, it's a little longer than it needs to be and pulling from just the outside with break it. Try and hold it as close to the base as possible.** I'll try and fix this issue when I have time. I recommend printing 100% infill in PETG since it has a higher tensile strength than PLA. STEP files are provided so anyone interested can make modifications.
Statistics
Likes
1
Downloads
0