SCX6 - Axle Stands
Description
Axial SCX6 axle stands; separated by front and rear (since they're different). My goal was to have the strength to hold up a ~28 lbs truck, but use as little filament as possible. You'll need to complete, two rear verticals (they're interchangeable) and the driver & passenger front verticals (these matter). Along with a front and rear brace (they're different as well). You'll also need 4 x M3x20mm cap head bolts and 4 x M3 nuts to hold it all together. The tolerance on the fitment is 0.125mm on every side, so fitment shouldn't be an issue for the center braces.
Statistics
Likes
2
Downloads
0