5-1/4 inch round speaker enclosure
Description
This is a 5-1/4 inch round speaker enclosure. The total speaker depth is 50 mm. The screw holes for the speaker are 141 mm diagonally. You'll need 4 x M3 brass inserts, 4 x M3 x 4 mm screws, 1 x terminal block for the speaker connections with the related screws and nuts and finally some wires to hook the speaker to the terminal block. A dab of glue is also required to mount the front grill. You will need to print 1 of each for each speaker. Support is not required. An infill of 20% is recommended. This object main web page is: http://www.ctheroux.com/5-1-4-inch-round-speaker-enclosure/. This object was designed using Solid Edge Community Edition. You can request the source files on the page listed above.
Statistics
Likes
0
Downloads
0