Print spool for eSun filament

Print spool for eSun filament

Description

eSun has filament of 1kg without the spool. This saves about € 1, but more importantly it is better for the environment. I therefore created the print spool. Additionally needed are two bolts of M5x50 and two M5 nuts ## Print settings: • Print material: PLA • Rotation of the objects: No comment. • Support: yes building plate • Skirt, brim: Skirt. ## Additional instructions • None ## Materials needed • PLA • 2 x Bolts M5 x 50 • 2 x Nuts M5 ## Version history ### Version 0.7 • Adjusted the diameter of the gaps of the bolts from 2.55 o 2.65 • Extended the length of the bolt so it will better fit the M5x50. This also means that it will not fit the M5x45 anymore. M5x45 is hard to get ### Version 0.6 • Closed the inner gap to easily mount and dismount ### Version 0.5 • Adjusted the diameter of the gaps of the bolts from 2.5 to 2.55 • Made the dept of the nuts the same Version 0.1 • First release

Statistics

Likes

2

Downloads

0