Illuminated Headphone Wall Mount
Description
I am a headphone addict. I have far too many sets of 'phones and 'buds and needed a better way to organize my most used sets without taking up a bunch of room (like with table-top stands). I added the option to include illumination if you wish, but it's not necessary to print/use the "spine" and "cap" files, or you can simply print them in your favorite color. Alternatively, you can also use clear silicone sealant instead of the printed diffusers. The mounts have semi-circular notches on both sides to accommodate the running of wires for LEDs. If you do choose to use illumination, I do recommend painting the inner parts with white or silver paint. It's pretty easy to use a model brush, or you can also use spray paint by aiming the nozzle into the ends, but the brush-on method is probably the better choice for most people. Only requires 1 screw to mount, though you may be able to get away with double-sided tape, but I would recommend using a screw instead. All the components are designed to snap into place and are held in place by compression, no glue required. The mounts in my photos were printed with 0.3mm layer height and PLA. No supports required for any parts. As with all of my shared models, this is free to use, print, share, remix, gift, etc. but you CANNOT sell these for a profit. Not everything needs to be ruined by capitalism.
Statistics
Likes
3
Downloads
0