E3D v6 hotend retrofit for Tevo Flash
Description
The objective of this project is to allow the use of much better quality hotends (E3D v6) with a Tevo Flash 3D Printer and provide an easier disassembly/maintenace process. I also believe the printer will look pretty close to stock after this conversion. I have all parts printed on a Professional HP Multi Jet Fusion 3D printer (PA12) but the prototypes were all printed in PLA (I strongly recommend supports for the vertical holes). Have on hand M2/M3 screws and brass inserts M2x4x3 mm (for the fan shroud) and M3x5x4 mm (for the hotend and BLTouch supports). Consider this as "work in progress" as more detailed assembling instructions need to be prepared. Anyway, it is already fully functional.
Statistics
Likes
1
Downloads
0