Ikea Hultarp Magnet adhesion adapter plate

Ikea Hultarp Magnet adhesion adapter plate

Description

This design helps with using double-sided tape on the Ikea Hultarp knife magnet. It can be screwed onto it to give a bigger surface for the double-sided tape (i used Tesa Powerbond). Use M5x16 screws. When printing diagonally it could be printed on my Anycubic Mega Zero 2.0. Hint: Before taping it to the wall, attach the magnet. Otherwise you will most likely rip off the tape from the wall as the magnet is really strong.

Statistics

Likes

2

Downloads

0