Tikka T3x basic buttpad extenders
Description
<b>Extend your Tikka T3x to grownup-length!</b> These STL files give you 9.6 or 19.6mm extra length of pull. Just mount them between the buttpad and the stock. If you have a plastic stock, the "male-in-stock" part is needed to keep the assembly from wobbling left to right. It fits inside of the stock, and secures the extender with two rounds plugs. Depending on your printer, you may need to try different sizes of these plugs - 10,0 och 10.1mm diameter. My STL files are sliced with Fuzzy skin, to better match the surface of a Tikka plastic stock. If you don't like the fuzz - use the F3D-file and remix. In any case, i suggest rubbing with acetone post-print, to get rid of plastic gloss. Longer screws are needed, at least for the 19.6mm version. <b>Please let us know in the comments if this also fits Tikka T1x and T3 (no X).</b>
Statistics
Likes
0
Downloads
0