Coleco ADAM Mean Well RT-50A Power Supply Case
Description
This case is designed to hold a Mean Well RT-50A power supply used to power a Coleco ADAM computer. There is a cutout to hold an [IEC 320 C14 plug connector with power switch](https://www.amazon.com/dp/B081VD1NNT) (from amazon). There is a 15mm hole for a [cable grip connector](https://www.digikey.com/en/products/detail/american-electrical-inc/1545-09-08/371301) (from Digikey) to hold the outgoing ADAM power cable. The Coleco ADAM computer has a DE-9 Male power input connector and the power cable has a DE-9 Female. Pinout for the ADAM power cable: * Pin 1: +12V * Pin 2: +12V * Pin 3: +5V * Pin 4: -5V * Pin 5: GND When printing, supports are needed in the 2 cutouts on the bottom half where the plug connector and cable grip attach. Two floppy drive screws (M3 x 5mm) hold the Mean Well power supply in place. Four #4 x 1 inch screws hold the case together. Created with Tinkercad: https://www.tinkercad.com/things/aGAEjuOemNv-coleco-adam-mean-well-rt-50a-power-supply-case
Statistics
Likes
1
Downloads
0