Nord 2 Dock with Micro USB Charging
Description
Nord 2 Dock with Micro USB Charging This is a dock for the Nord 2 E-Cigarette with a holder for a micro USB cable for charging. It has a groove on the underside for the USB lead placement holding it in. The USB cable this is design for is this one: https://www.amazon.co.uk/gp/product/B08XJ893SC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 It's a good fit, not much wiggle room, and it holds - But I superglued it in place anyway - The less the USB plug can move around, the better seen as though you're just pushing the Nord 2 down into the dock. The way I ensured the micro USB would drive into the Nord 2 when you push it down into the dock is... I first ran the USB cable through the hole and plugged it into the Nord 2. Then put some superglue into the hole, and then push the Nord 2 into the dock with the cable still attached. BE CAREFUL WITH THE GLUE - YOU DONT WANT TO GET IT ON THE NORD 2. I also put some rubber feet (90mm) on the underside to stop the dock slipping. WEIGHTED DOCK I added a weight to the dock as an afterthought. The dock is too light. I did this in the form of using several English 2p (pence) coins held by a shroud and glued on. It makes a big difference. You should be able to easily adjust the size of the shroud in Cura or even import into Tinkercad to fit your coins if you don't live in the UK or just happen to have English 2p coins laying around.
Statistics
Likes
0
Downloads
0