Boba Fett Helmet Plaque
Description
# Summary I made this for my son for his birthday. I saw something similar online and thought I could do this... So I did. There is a small version about 46mm and a larger version about 140mm. # Instructions You will need to use supports for the rifle hanging off the edge. I tried it with it hanging and with it not, and it looks better with it over the edge. You can place this on an easel. Or like I did and put a picture hanger on the back of it. I used two m2*4 screws which was the smallest I had and some glue. If you use a picture hanger you might want to increase the z-axis some before you print it. I had to place the hanger behind the helmet so the screws would not go through the front. If you print at 20% infill you will need to add glue to the screws to support the hanger. The wall thickness is not enough on its own. Enjoy! # Attention There is a zip file with everything if Thingiverse is still having the 404 error for downloading all.
Statistics
Likes
1
Downloads
0