Creality CR-6 SE Optical Filament Sensor Inline Case
Description
This will allow you to add PC4-M10 couplers to the ends of the Creality CR-6 SE optical sensor so it can be used inline. In my case, I'm using it with my direct drive Ender 6 as it was easier to load and more reliable than the previous two sensors I was using. I secured it with a couple of extra M3x20mm socket cap screws. Parts ----- Below is my list of parts I used (affiliate links). • CR-6 SE Runout Sensor : https://www.amazon.com/dp/B09B7HHF15/ref=cm_sw_r_as_gl_apa_glt_fabc_T2RD7HYG3VREQKPA30SA?_encoding=UTF8&psc=1&linkCode=ml1&tag=vampyrex13-20 • PC4-M10 : https://www.amazon.com/dp/B07ZCNB1L8/ref=cm_sw_r_as_gl_apa_glt_fabc_T2RD7HYG3VREQKPA30SA?_encoding=UTF8&psc=1&linkCode=ml1&tag=vampyrex13-20 If you want, you can buy me a coffee at https://ko-fi.com/vampyrex13
Statistics
Likes
0
Downloads
0