Traxxas Hoss 4x4 VXL GoPro Camera Mount
Description
I remixed this GoPro mount created by CKreations for a Traxxas Slash 4x4 to work with a Traxxas Hoss 4x4 VXL. I actually just sliced the actual GoPro mount part off of his and remodeled the entire base. I also took some dimensions from his model. On the original model the camera mount was at the front of the mounting plate, and I have moved it to the back. I figured this would offer a bit more protection if you run in to something, as well as it will move the center of gravity back. I've also made the mounting part so that it is a solid block with no space underneath it. This was designed for a family member, and he wanted it as strong as possible, so it was changed for this reason. He also wanted a thicker base. I thought this was unnecessary, but I made it anyhow. The provided photos are of the thicker version. This will likely require longer screws than the ones that come stock. I believe the thinner version works with the original screws. 1/1/2022 - Minor modification made to reduce the amount of support needed and increase printability
Statistics
Likes
0
Downloads
0