LED light for Eryone Thinker S and SE
Description
Support for a 2W 5V LED light available on aliexpress, led size is 60mm x 15mm. Parts needed; LED cob 2W 5V (https://www.aliexpress.com/item/1005001424797203.html?spm=a2g0o.productlist.0.0.20e25152UkEkK2&algo_pvid=ecd07281-af20-429e-9544-4a24cffcdcea&algo_exp_id=ecd07281-af20-429e-9544-4a24cffcdcea-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000016060312299%22%7D&pdp_pi=-1%3B1.41%3B-1%3BCAD+1.25%40salePrice%3BCAD%3Bsearch-mainSearch) Step down converter 24v to 5v dc (https://www.aliexpress.com/item/1005001970587690.html?spm=a2g0o.productlist.0.0.453b5dc6K2XLDk&algo_pvid=b0cbd429-7155-4a26-8282-a6f509658ca4&algo_exp_id=b0cbd429-7155-4a26-8282-a6f509658ca4-3&pdp_ext_f=%7B%22sku_id%22%3A%2212000018270335835%22%7D&pdp_pi=-1%3B0.9%3B-1%3BCAD+1.36%40salePrice%3BCAD%3Bsearch-mainSearch) 5V relay (https://www.aliexpress.com/item/32812356669.html?spm=a2g0o.productlist.0.0.7e7a1008WjQIq5&algo_pvid=436e3795-daec-44a9-99b7-95c4be656704&algo_exp_id=436e3795-daec-44a9-99b7-95c4be656704-2&pdp_ext_f=%7B%22sku_id%22%3A%2265319348051%22%7D&pdp_pi=-1%3B0.73%3B-1%3BCAD+2.47%40salePrice%3BCAD%3Bsearch-mainSearch) 2M of 24g wire Red and 2M of 24g wire Green Enclosure octoprint plugin Print the support, drill a hole thru the 2020 extrusion on top for the wire to go thru the extrusion, then drill another hole on the left side to go thru the Z-axis 2040 extrusion and drill a hole on the 2040 base extrusion and plug the wire on the 5V relay and step down DC converter like pictured and plug the IN in GPIO pin 4 or any GPIO pin you want. Set the relay jumper on high. Install enclosure plugin for octoprint, go to config, set pin 4 or the pin you used in the config and save. Took me about 1hr from start to finish with all part in hand, tested on my 3 thinker and work #1 May the force be with you! Relay box; https://www.thingiverse.com/thing:2856981 DC converter box; https://www.thingiverse.com/thing:1686779
Statistics
Likes
2
Downloads
0