Oculus Quest 2 Controller PVC grip
Description
Oculus Quest 2 PVC Rifle Grip First off would like to thank Bluefreddo for the Oculus Quest 2 controller Pistol Grips design. His design was an excellent component to utilize in creating this PVC Rifle Grip. Have been playing Gun Raiders on Quest 2 and wanted something to steady my aim a bit for two handed weapons in game. This design allows for detaching your off hand for reloading etc. I designed these specific models for Right hand use. If you want left hand or option for ambidextrous use - just put magnets in the other grip or both grips. They both have Magnet pockets and both are threaded so either one can fit on the L and R sleds. Materials Requried: PVC as shown in images: - Need at Least ~24" of 1/2" PVC to build as shown in images (I don't have exact measurements yet - Still working on exact design I want) - x2 - 45° 1/2" PVC couplers - x2 - 90° 1/2" PVC Couplers - x1 - 1/2" Tee Coupler Hardware: - x4 - 6-32 x 1/2" Screws - x4 - 6-32 Nyloc Nuts (preferably Nyloc but can use regular) - x2 - M3 x 10mm long Screws (designed for hex head socket cap screws) - x8 Magnets - dimensions were 9.6mm x 1.6mm measured but could be a bit smaller. (8 is minimum. If you want ambidextrous options, need 12 magnets) - x4 Zip Ties - OPTIONAL Printing Instructions: L and R Grips: - Can be printed in 0.2mm layer height with 15% infill (or more if you want.) - 2 walls minimum - No supports required (orientate the model so flat part is down.) Whichever Grip is to be off hand (or both if you want ambidextrous): - IN SLICER: pause print to insert magnets into pockets. MARK magnets so they connect correctly to grip Sled L ( magnetic attachment point for offhand): - I printed in 0.2mm layer height with 15% infill ( would recommend more infill but 15% worked for me) - 2 walls minimum - No supports required (orientate the model so flat part is down.) - IN SLICER: pause print to insert magnets into pockets. MARK magnets so they connect correctly to grip Sled R (with holes for threaded attachment point for main hand grip): - I printed in 0.2 mm layer height with 80% infill - Also added full infill every 6 layers for strength - x3 walls - No supports required (orientate the model so flat part is down.) - when assembling this part - BE VERY CAREFULL and DO NOT OVERTIGHTEN screws. Screws should be snugged until Sled is secure on PVC. This design is a work in progress and may provide suggested PVC measurements at a later date. Assembly Instructions: Mainhand Grip and Sled R: - Put M3 screws through sled R and attach to desired mainhand grip. Do not overtighten. - Slide Sled R assembly onto main PVC pipe at desired location. CAREFULLY SNUG 6-32 screws. DO NOT OVERTIGHTEN. Just needs to be snug enough so Sled R does not easily rotate. - (Optional zip ties): There are 4 holes cut into sled R if you want to add zipties to help secure Sled R in place. Do not overtighten these as well. Holes are 3mmX 2mm so whatever zip tie fits through that. Offhand Grip and Sled L: - Place Sled L onto PVC frame so it is in line with Mainhand Grip on horizontal plane (see photos for example) - insert 6-32 screws into holes and nyloc nuts and Snug them up. Do not overtighten, just needs a few turns. Grips: - Slide controllers through grips and negotiate straps through side holes. - If controllers start to slide a bit during use, shove a piece of paper into grip and that should help. (may work on a side strap for these to aid in keeping controllers in place and to help hands grip controllers as well, so stay tuned) Plan to add some features / PVC measurements in the future. Let me know how it works for you!
Statistics
Likes
1
Downloads
0