M5/M4 Mod for Nano Vise (V2) by PRIma
Description
I like the design of the "Nano Vise V2" but find the M8 screw, which connects the balljoint with the base, to be kind of overkill for such a small part. Not to mention that I don't have any M8 screw on hand :-) So if you want to use a M5, or M4 screw instead of the M8 screw, just replace the balljoint and place one of the spacers in the base. Additional parts needed: 1 screw M5 x 15, or M4 x 15 1 washer for M5, or M4
Statistics
Likes
1
Downloads
0