Raspberry Pi Open Wall Mount
Description
Simple open wall mount designed for the Raspberry Pi 3B+, although it *should* also fit some other models, including the Pi 4. All ports and pins are accessible. No additional hardware needed; the Pi is held in place firmly by 3 clips. Important note: if using the cross shaped screw holes, check your screw head is not touching (and shorting) the back of the board. I have included an 7mm clearance version to accommodate larger screw heads. Recommend printing everything above the 3mm base at 100% concentric infill (or increase the number of perimeters/walls) to achieve the best quality mounts and clips. No supports needed. 4mm clearance version pictured.
Statistics
Likes
1
Downloads
0