Flywoo Mr Croc 7 frame extends
Description
PURPOSE: Miscellaneous extensions for Flywoo Mr Croc 7 inches frame. You'll find here some extensions designed and tailored especially for Flywoo Mr Croc 7 inches quad rotor frame. Thing #1: Support_Backside.stl This is a multi-purpose rear support which can carry GPS, VTX and RX antennas. The outside part of this support can hosts a GPS, VTX and RX antennas. It suits for 20x20 GPS receiver as well as Immortal-T antennas, beneath the GPS mount. Thing #2: Support_RX.stl This support has been designed to host a second Immortal-T antenna, perpendicularly with the first which is beneath to the rear support. The inside part of this support can also hosts a nano receiver (like the Crossfire diversity or single). Thing #3: Support_VTX.stl Component support for 30x30 holes, designed to host VTX (or anything else), to be placed at the rear part of the frame. Thing #4: RotorFoot.stl These foots are needed with Support_RX thing. For all those things, prefer a strong infill density, such as 80 till 90%, for a good soundness (especially if you print with PLA filament). My advice, prefer TPU filament for more soundness and then can support more hits ;-) The overall things works perfectly but could be improved in the future if any.
Statistics
Likes
0
Downloads
0