Lionel Ready-To-Play RTP PIKO Truck
Description
I made this adapter to run a PIKO grain car on a Lionel Ready-To-Play set. You'll need: * 1/8" rod for the axles cut to 72mm * 1.6mm screws to fasten the bogies to the truck - any length will do, I used 8mm. * Coupler of your choice * 3x12mm screw & washer to fasten coupler * 3mm washer to fasten truck to train car (re-use 3mm PIKO screw)
Statistics
Likes
1
Downloads
0