V6 hotend (V6-style hotend) short filament path mount for Orbiter extruder v1.5
Description
Mount an inexpensive V6-style aluminum heatsink on an Orbiter Extruder. (*This is not a mod for Ghost5, although it uses Ghost5 parts.) There is a block on the V6 hotend to secure it to the Titan or BMG. This is just extra to lengthen the filament path when mounting to the orbiter. Also, since there are no heat sinks that can be directly attached to the orbiter We looked for a heat sink that can be directly attached to the orbiter by diverting an existing product Plan 1.(recommended) Use the dedicated heatsink from flyingbear ghost 5 Print the adapter and screw it on It is easy to maintain after installation. No need to modify the heat sink. We do not recommend using the flying bear heating block as it is an inferior product. The supply period of the parts is determined by flying bear. Plan 2. Put an M7 tap on the V6 (clone) heatsink. Metal processing is required. Threads need to be made straight. Filament path can be shorter than plan 1. I made a support part for tapping work.
Statistics
Likes
0
Downloads
0