CR-6 SE Extruder Shim
Description
I made this shim to raise my extruder and filament runout sensor a bit, to come more in level with the other end of my drag chain design (https://www.thingiverse.com/thing:5156639). At the same time, I have come to realise that some people are concerned about the gears of their BMG extruder risking coming in contact with the z rod bracket, and therefore mount their BMG extruders backwards. Using this shim will eliminate any such risks, even if you don't use the drag chain, so therefore I decided to upload this thing separately from the drag chain design. Since Bondtech delivers the BMG extruder with 38mm screws, which is definitely not standard, I made this shim 7mm thick so that standard 45mm screws will work as a replacement. You will need three M3x45 screws with an internal socket hex head.
Statistics
Likes
1
Downloads
0