qidi 6.08 mono resin vat V3 (right side spout)
Description
This is a mirror image version of https://www.thingiverse.com/thing:5151210. It has the spout on the right front rather than the left front. ***NOTE:*** I have tested the installation & tensioning of an FEP sheet and tested the assembly for leaks using water (no leaks found), but I have not yet used it for a print in my printer. This thing consists of components to assemble a resin vat for use with a Qidi 6.08 Mono resin printer. This design uses all M3 flat head (aka countersunk) screws. The FEP frame uses either 28x M3 6mm threaded inserts (C2) or 28x M3 nuts (C1/C3). The vat can be printed to use either 8x M3 6mm threaded inserts (version A2) or M3 nuts (version A1). A high wall count is suggested for wall integrity. I used 7 walls. I also used Cura settings to print 100% infill in the areas immediately surrou8nding the threaded insert/nut locations on the vat. I used 20% infill for the rest.
Statistics
Likes
0
Downloads
0