Movi Pro / Miller DS - Camera Plate
Description
<h3>Model</h3> This is a combined tripod plate allowing you to switch seamlessly from a Freefly Movi Pro to a Miller DS series tripod in seconds. It is similar to the [Ignite Digi](https://www.ignitedigi.com.au/products/gimbal_mate_universal_camera_bottom_plate?_pos=1&_sid=f52e21348&_ss=r) Gimbal mate which combines the Movi and Ronin 2 Plates. If you would like to see other combo plates please let me know. <h3>Print Settings</h3> I would highly recommend printing the camera plate with 4+ walls and a strong, stiff filament like PLA, PC or PETG. <h3>Parts needed</h3> 3/8"-16 or 1/4"-20 Tripod Screw <h3>Installation</h3> (1) Attach as a normal camera plate (2) Switch between gimbal and handheld in seconds! <h3>Disclaimer</h3> As the mating Movi plate interferes with the bottom side there is no room for a the safety lock on the tripod plate, please be careful when using the plate on a DS series tripod as it will slide right off if it is not properly tightened. I also do not recommend attaching more than a mirrorless / DSLR sized rig unless you are using an engineering grade filament or metal plate. <a href="https://www.auroradigitalsystems.com/" title="Website"> Website</a> <a href="https://www.instagram.com/auroradigitalsystems/" title="Instagram"> Instagram</a> <a href="mailto:hello@auroradigitalsystems.com/" title="Email"> Contact</a>
Statistics
Likes
0
Downloads
0