Dolch PAC-60 Keyboard Peg
Description
Replacement/repair keyboard peg/post for the Dolch PAC-60 (and likely earlier and later Dolch keyboards). This peg is used for locating the top edge of the keyboard into the housing below the display and prevents it from pulling off when latched. My PAC-60 was missing both of the pegs which appear to have been snapped cleanly off at the base of the keyboard. These replacement pegs come with a 0.4mm (adjustable in the OpenSCAD file) base to allow for a larger contact area to be glued down. For these feet I simply super-glued them in place with the peg part lining up over the original outline that was left on the keyboard.
Statistics
Likes
0
Downloads
0