Movi M10 - Power and SDI Breakout
Description
<h3>Model</h3> This is a power and SDI breakout for the Movi M10. It attaches to the rear of the camera plate of the Movi M10 using the double sided tape from the IMU. <h3>Print Settings</h3> I would recommend printing this with a quality filament and 4+ perimeters. <h3>Parts needed</h3> 2X 0B 2 Pin Lemo Connectors 2X Panel mount SDI Connector (Male and Female) 1X SDI and power Cable 1X BNC Crimping tool 1X Cable Sleeving 1X Ziptie <h3>Installation</h3> (If you would actually like to install this I am happy to do it for you or make a video showing the exact process) (1) After printing the breakout install the three connectors and solder them up accordingly, measure the correct length to have the power cable reach the power switch and the SDI cable reach the top of the Gimbal. (2) Remove the lower carbon fibre plate of the IMU, replace this with the breakout <h3>Disclaimer</h3> This is currently a work in progress and will be updated soon. <a href="https://www.auroradigitalsystems.com/" title="Website"> Website</a> <a href="https://www.instagram.com/auroradigitalsystems/" title="Instagram"> Instagram</a> <a href="mailto:hello@auroradigitalsystems.com/" title="Email"> Contact</a>
Statistics
Likes
0
Downloads
0