Adustable BL-Touch and Endoscope Mount for the Hydra Duct System (designed for the CR10S Pro with Microswiss) With STEP file
Description
This is an adjustable BL-Touch mount and endoscope mount which I designed for my Remix of BoothyBoothy's awesome Hydra Fan Duct System (https://www.thingiverse.com/thing:4062242). My remix is for my printer which is a CR10S Pro with a Microswiss hot end (https://www.thingiverse.com/thing:4640040), so this mount was designed with the dimensions for my printer and Hydra remix in mind. However, since the design is pretty simple, I think it may fit other printers as well. To see if it will work with a printer, check that the distance between the center of the lower fan mounting screw and the tip of the nozzle will have enough clearance for the endoscope mount (see the pic for the dimensions). Note that the endoscope will poke out several mm from the end as well and there should be a few mm of extra clearance so it does not hit anything. The STEP file is included and it should be easy to modify the endoscope mount up or down several mm as needed (and if you do that, please post a remix). I posted some notes on how I set up multicam for Octoprint on my blog here: http://www.mystoopidstuff.com/blog/the-nozzcam-is-working If you don't need an endoscope mount, I will post the adjustable BL-Touch mount separately. I printed mine in PETG. Parts are not oriented for printing. I used supports on the fan mount and minimal supports can be used on the BL-touch mount if needed. If you make one, please post a make and let me know what you think (and which printer and mount you used it with). Thanks for looking!
Statistics
Likes
0
Downloads
0