Mikrotik hAP Lite DIN Rail Mount Enclosure
Description
This is a case to hold the Mikrotik hAP Lite RouterBoard which can be mounted to a DIN Rail. I needed a number of these boards for a project, but didn't like the cases they came in, so I designed my own which can mount to a DIN rail, holding the router vertically for space saving constraints. All 4 ethernet ports are accessible, as are the MicroUSB power port and the Mode and Reset buttons. I've not left holes for the LEDs or for ventilation as they are not required for my use-case, but these can be easily added. The two halves of the case fit together well, but do not clip together, I used a tiny dab of superglue on each corner for the final product, although in testing the cases stayed together without issue. The parts were designed on Fusion360 and I sliced them using Cura, although I did have to set it to 101% size to get the best fit. My production cases had text embossed on the top of the lid, where the port numbers are also embossed, but this version does not include the text.
Statistics
Likes
0
Downloads
0