Mount for type 2 plug
Description
Remix of Halter für Typ 2 Stecker - Holder for type 2 plug I liked the idea of the original with the lock mechanism and cable storage, but wanted to have a straight handle of the plug Changes: Halter_Typ2 -(splitted into 2 parts)-> wall holder type 2 and plug connector wall holder type 2 (res 0.3, without support): wider and longer surface for longer cables, angled connection for the plug connector, so it points straight down, adjusted the holes for M8 screws plug connector (res 0.3, with support): widened the whole a little bit, added Riegelaufnahme into the part, widened the 2mm hole for 4mm screws, because 2mm screws are hard to get, changed the guidance of the magnet for a spring (I used a spring from a pen and halved it), adjusted the holes for M8 screws Kabelauflage_Rand --> front protection (res 0.3, without support): adapted to the new holder Riegel --> lock bar (res 0.1, without support): narrowed the lock bar for an easier tilting Riegelaufnahme --> integrated in plug connector Kipphebel --> lever (res 0.1, without support): adjusted the holes for 4mm bolts and strengthened the outline, added a guidance for the spring that replaces the magnets which are also hard to get assembly: just like the original but instead of M2 screws and magnets you need M4 and M8 screws and nuts and a small spring for example from a pen
Statistics
Likes
0
Downloads
0