TX22 back plate charging handle
Description
I wanted to start turning my Taurus tx22 into a mini race gun for fun without breaking the bank. This part replaces the back-plate and has an integrated charging handle. Print using supports with the L shaped cut facing up since that interfaces with the back of the firing pin and you don't want hick ups. I would suggest high infill if not 100%. I am not liable for your misuse or injury resulting from the failure of this part in your gun. I highly suggest testing with remote firing (vise and string) before trusting it. There should not be any strong forces on the back plate as it mostly just retains the firing pin spring. The largest forces should be the inertia from the slide reciprocating which could send the charging handle flying if it breaks off. always wear eye protection. I have also made a red dot mount with 19mm hole spacing which fits 'RMR' foot prints. Check out my other files!
Statistics
Likes
0
Downloads
0