Bag Clip with strong hinges and a strong locking mechanism
Description
Object Description: This is my design of a bag clip. The clamping length is mentioned in the file name. The 60mm version is added here. This bag clip is available in different length under the following link: https://www.prusaprinters.org/de/prints/116477-bag-clip-with-strong-hinges-and-a-strong-locking-m/files Please understand the cross-link. I would like to manage all the variants only once. Advantages: - Stable hinges - Wobble-free hinge design - Easy to close - It clamps reliably even thin bags - Marble pattern in the grip zone for a better finger grip Disadvantages: - Due to the small support lines in the hinge area, the hinges do not turn quite as smoothly at the beginning as with other designs. However, this does not negative effect the function and becomes better with each opening / closing operation. Comments: - Print the clip on the side as suggested in the data file. There are small supports in the hinge that would not work if you turn the clip on the top side. - After printing, the hinges must be broken loose. - After bending back and forth several times, the hinges turn much smoother. - The design is aligned for a layer height of 0.2mm and a 0,4mm nozzle. Other layer heights have not been tested so far. But every comment regarding other settings is welcome. Regardless of whether the print was successful or not.
Statistics
Likes
0
Downloads
0