Yamaha Waverunner FX Rear Compartment Latch
Description
Yamaha Waverunner FX PWC Rear Compartment Latch The OEM rubber rear compartment latches that comes with the Waverunner jetski are poorly designed and will generally perish around the connection pin (2nd picture of OEM part shows this). These are solid alternatives, for strength I'd recommend printing with PETG or Nylon at 100% in-fill. You can buy CNC billet latch replacements, however these are generally around US$100 or so for a set, so printing this is a much more cost-effective alternative. You'll also need to print out 4 x pin holders per latch too. These are a push fit (replacing the originals) and protrude slightly (0.5mm) when inserted into the latch (by design) They don't sit perfectly flush with the latch, allowing easier removal if required. Note: I have designed this for a friends ski, and not tested quite yet (testing on the 15th Jan 2022). It's a replica of the original so should work just fine, if you happen to download and test before this time let me know in the comments section.
Statistics
Likes
0
Downloads
0