Compressor blowing rev.2 laser engraver TotemS and analogues
Description
Blowing of the Totem S laser engraver and analogues, laser size 40*40 mm.There may be jambs with the dimensions of the tube fastener on the radiator, because it feels like the cuts are made with a file (my dimensions on one side relative to the other float within 3 dozen). The focal length of the laser is 20 m, the distance from the lower blowing point to the treated surface is 2 mm. The diameter of the tubes is 6 mm. A compressor for an aquarium with two outputs is used.The blowout itself printed without supports.
Statistics
Likes
0
Downloads
0