R/C camber Caster Wedge Mini T/B
Description
This Wedge is to compliment the flat disks found in the link I have below. Note - The disks need to be scaled up to 103%, They are a little too tight on the axles / hexes otherwise. https://www.thingiverse.com/thing:5168203 You'll have to print two of these to get your toe settings right, I used a steel ruler for a straight edge to help with toe settings. These will also help you set camber setting too. I had to use Ironing to make the tops look good. Not a Professional setup but it works great for your average setups / armature racers, of course a setup board will also help too.
Statistics
Likes
0
Downloads
0